·  Miniaturized Wireless Remote-controlled Models  ·                                       

New for 2006: EPOCH's famous Indoor Racer has been given new life in 2006 - just in time for the next mini R/C trend. There will be many new exciting bodies & hop-up parts to be released soon.

Introduction: EPOCH's Indoor Racer 'Spec 2' is a fully proportional 1/43 'professional' radio-controlled car at one half the size of the Mini-Z and Palm Runner. Its package includes charger, radio transmitter, AM 27 MHz crystals, pre-painted ABS plastic body, chassis. Add a 9V battery to the transmitter and 6 AA batteries to the charger and you are ready to race with a scale speed of up to 300 km/h & beyond! In short, Indoor Racer race as fast as a Mini-Z or even faster depending on the track, tires, components & bodies being used.

Transmitter features digital proportional steering and forward/reverse throttle. New floating front and rear suspension system. Charger charges the 3 built-in NiMH batteries in car via a small cable. A charge time of 2 minutes provides an usage time of about 6 - 9 minutes.

Thanks to the redesigned and optimized electronics, Spec 2 is a faster car with longer run times than the older Spec 1. A new spring and spacer have been included in the chassis to allow adjustment of the front/rear suspension for variable ground clearance. Adjustable wheel base, larger wheels/tires and a larger clear plastic bumper has also been added.

Frequency of the receiver and transmitter can be changed by a crystal in each unit. A maximum of 12 cars can simultaneously run by exchanging the crystals which are readily available at most R/C hobby shops.

Drifting: This is a big thing these days in the import car & R/C sccenes. With the new motor & EPOCH's new Turbo board, Indoor Racer beats a Mini-Z flat out so if you have a slick floor or track, oh yea!

Hop-Ups: Upcoming hop-up parts include but are not limited to: aluminum motor mounts with dual motors & ball bearings, ball bearings on the front hubs, carbon fiber chassis, 4-wheel-drive 1/43 bottle rockets w/ external Mofets, litho-polymer batteries and/or 3-can cell packs (litho & 3-can pack enable run time of up to 55 & 45 min respectively.

Features:

  • Ergonomic pistol-grip controller
  • 27 MHz. Interchangeable crystal / 25m range
  • High / Lo speed option. Throttle trim. Steering trim.
  • Amp-FET + micro servo
  • Applied reverse brakes
  • Body: 110mm x 48mm x 42mm
  • Chassis: Duracone double deck type
  • Three-point suspension system
  • Front suspension: Independent coil-over spring
  • Rear suspension: T-bar
  • Gearing: 3-pinion rear differential
  • Battery operated chassis (integrated on-board NiCD)
  • Charger unit with auto power cut-off

  • Home Automotive Indoor Racer :
    Indoor Racer  
    - NOTE: RTR = Ready-to-Race (RTR) set includes the car (body + chassis), charger & the radio. That's everything that you need to start racing!
    (#54180RTR)  Subaru Impreza WRC - Ready-to-Race (RTR) set $050
     Color:  
    (#54190RTR)  Mitsubishi EVO VII WRC - RTR $050
     Color:  
    (#47940xxxRTR)  Subaru Legacy - RTR $050
     Color:  
    (#48180xxxRTR)  Nissan Skyline GT-R - RTR $050
     Color:  
    (#54200xxxRTR)  Toyota AE86 Levin - RTR $050
     Color:  
    (#54230xxxRTR)  Honda Integra Type R - RTR $050
     Color:  
    - UPDATE: This line seems to be out of production.
    - NOTE: Keep away from pets & children! These 1/43 fast-moving cars may pose harm to children & pets upon collision.
    - Parts: We only sell Indoor Racer replacement bodies & all parts to registered Sigma/NanoRC Indoor Racer customers. If you have purchased Indoor Racer from us previously, please provide us with your order number when ordering the parts.
        

    Subscribe E-mail:

        

    © - USA. 617-344-8396 (fax)
    Home  |  Order Info  |  View Cart  |  Contact  |  Tell-A-Friend  |   Forum


    Affiliated Sites:
      [  Aquaristics  |  BOSSBi  |  Earthority  |  NanoRC  |  SigmaAuto  ]