Mini-Z Racer & Palm Runner – Kyosho remote-controlled Palm Runner (Mini-Z Light), Mini-Z Racer cars

You will be amazed at the authentic display-quality exterior detail of these palm-sized 5" long (scale: 1/28) Mini-Z Racer & Palm Runner R/C cars. Their true-scale bodies feature such fine touches like headlights, rear spoilers and decals for accurate reproduction. Internally, high-tech engineering enables exceptionally realistic performance - with forward and reverse two-wheel drive, fully proportional steering, sophisticated front & rear suspension systems, real car-like acceleration, braking, and much more.

Each car comes factory-built and complete with everything you'll need for operation (except alkaline batteries). There's nothing to glue or paint. The electronics and radio equipment -- including a 2-channel transmitter, high-frequency speed control and special miniature servo -- is all so well-designed that it's simple to use and maintain. Display them...drive them...set up a course using the pylons and speed bumps and race against another car. In an area as compact as 3' x 6' (floor or tabletop), you can enjoy a thrilling contest with up to 12 (in case of Mini-Z Racer) or 2 (in case of Palm Runner) cars competing at once.

Ships complete with pre-assembled chassis, Mini-Z Racer & Palm Runner share the identical pre-painted bodies. A 2-channel efficient and responsive wheel-type controller is also included. Accelerate forward by pulling the trigger. Decelerate and reverse function also available. Each sturdy car features real functioning front & rear suspension and drive train systems. When not in use, they look great just sitting atop a PC.

The "MINIZ Racer" is not only small and does not only give you a large-scale feeling, but it is also an unprecedented new generation palm-sized racer. It comes with a newly developed receiver with built-in amplifier plus a micro servo, all installed in a 90mm-wheel base chassis. In addition to this, the amplifier is a FET high frequency type that provides high power. Also, the receiver is 27MHz-narrow band-ready and allows for up to 12 cars to run simultaneously. A long running time of about one hour is also possible with only four AAA alkali batteries. Sleek racing with a 3P suspension 130-class high power motor and differential gears makes it possible to enjoy "Racing Everywhere". In addition to the authentic chassis performance that only KYOSHO can produce, various optional parts allow for further racing improvements. The portability and authenticity of the "MINIZ Racer" will raise the standard of R/C racing to unprecedented levels.

Bred from the same stock as the "Mini-Z Racer" - this is a high quality pure bred racing machine representing amazing value. Real suspension and drive train systems are features of a fully factory-assembled chassis. Together with factory-painted Mini-Z Racer body decorated to a high level of detail, you're ready to race as soon as it's out of the box. Efficient and responsive newly-designed Wheel-Type Controller that uses a long life 9V battery for its power supply. 2x AA size alkaline batteries can power more than to 2 hours of racing. Real functioning front and rear suspension systems. While Mini-Z Racer targets anyone from beginner to expert level, Palm Runner is more like an entry-level version of it. Whenever you are ready to upgrade to the former, you may at least reuse the body or use as spare.

Mini-Z Racer (CHASSIS) Technical Data
Chassis Length	130 mm
Width	65 mm
Height	38 mm
Weight	170 g (Chassis)
Track (F/R)	56.5 mm
Tyre Size	25 x 8.5 mm
Weelbase	90 mm
Gear ratio	7 : 1
Motor (incl.)	130 Type
Controller (incl.)	FET HF Type
Battery (not incl.)	Chassis: 4x AAA / Controller: 8x AA

Palm Runner (CHASSIS) Technical Data
Chassis Length	126-130-134 mm
Width	65 mm
Height	38 mm
Weight	170 g (Chassis) / 160 g (Controller)
Track (F/R)	F/R 65 mm
Tyre Size	26 x 8.5 mm
Weelbase	86-90-94 mm
Gear ratio	8.66 : 1
Motor (incl.)	130 Type
Controller (incl.)	2-ch.
Battery (not incl.)	Chassis: 2x AAA / Controller: 1x 9V